Restraint System & AMR Reinforcement

Ancon 25/14 Restraint System

For tying masonry to steel frames. Channel and cavity wall tie for use in the construction of steel-framed buildings. Self-drilling screws fix through the channel and the insulation material, into the steel.

Ancon AMR Masonry Reinforcement

To strengthen masonry panels. Stainless or galvanised steel reinforcement, installed in a bed joint to strengthen masonry walls. Manufactured in lengths of 2700mm. Available in five wire diameters and four widths, AMR suits the majority of wall conditions. For collar-jointed walls use Ancon AMR-CJ.

Teplo-L-Tie Wall Tie

Ideal when a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. It offers all the same benefits as the original TeploTie basalt fibre cavity wall tie, with an additional stainless steel upstand which is mechanically and chemically bonded to one end of the tie to allow for a secondary fixing.

PPS Movement Tie

PPS ties are used across movement joints in masonry walls. Lengths available 175, 225, 250, 275, 300mm